[Miata] Parking brake

[Larry Alster]

Nope, if you have the rear brakes adjusted properly once to the 1/3 turn before you adjust the cable length then you don't need to deal with the cable length again.


Larry

White Knight   1991 Crystal White   #99 CSP
Silver Bullet     1992 Silverstone     #17 EM  FM I+ Turbo
Honey B         1992 Sunburst Yellow  J.R. M45
Whooosh       2004 Titanium MazdaSpeed MX5

LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074

  ----- Original Message ----- 
  From: RESOMMER at aol.com 
  To: miata at realbig.com 
  Sent: Wednesday, January 10, 2007 9:34 AM
  Subject: Re: [Miata] Parking brake


  And we should also un-adjust prior to new brakes?

  Rick and Ghenghis Kart
  '00 Black and Tan

  In a message dated 1/10/2007 7:28:20 A.M. Central Standard Time, the.jack at verizon.net writes:
    Once the rear is properly adjusted to 1/3rd of a turn 'til tight (as previously described and agreed upon by most or all I
    think) if the hand lever is still loose (say >10 clicks) THEN adjust the hand lever nut. However don't use the lever to adjust out
    the slack that should be handled caliper-side.

    Chris C.
    99 Mazda Miata 5-sp Emerald 




------------------------------------------------------------------------------


  _______________________________________________
  Miata mailing list
  Miata at realbig.com
  http://ftl.realbig.com/mailman/listinfo/miata
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ftl.realbig.com/pipermail/miata/attachments/20070110/36e17b86/attachment.html