[Miata] Cranksha Position Sensor: Location: update

[Larry Alster]

Can't you just rejoin the wires and insulate them with some heat shrink tubing??


Larry
 
White Knight      1991 Crystal White   #99 CSP
Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
Honey B             1992 Sunburst Yellow #99 SM2L  JR Supercharger
Whooosh           2004 Titanium Mazdaspeed MX-5
 
LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074
  ----- Original Message ----- 
  From: glpp2 
  To: miata at realbig.com 
  Sent: Thursday, August 30, 2007 8:59 AM
  Subject: [Miata] Cranksha Position Sensor: Location: update


  Thanks Keith, K.C. and Bryan,

  I found that the wire had been chewed through by the pulley.  One wire completely through, and one partial.  
  Cause of wire misplacement?  I replaced the timing belt about 700 miles ago.  I really thought I had tucked everything out of the way.  Really.  How-some-ever, apparently not.  :-(   Live and learn.
  So, off to the NAPA store.  Curiously, NAPA's website lists three different replacements, all with different prices ($76 to $104), for my 97.  Can't tell from their web page if VIN# matters.  Maybe I'll try Mazda.

  Thanks for your help,
  Glenn G.


------------------------------------------------------------------------------


  _______________________________________________
  Miata mailing list
  Miata at list.realbig.com
  http://list.realbig.com/mailman/listinfo/miata
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.realbig.com/pipermail/miata/attachments/20070830/5cda242f/attachment.html