[Miata] BRB & E-brake warning light

[Larry Alster]

Big Red Button


Larry
 
White Knight      1991 Crystal White   #99 CSP
Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
Honey B             1992 Sunburst Yellow #99 SM2L  JR Supercharger
Whooosh           2004 Titanium Mazdaspeed MX-5
 
LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074
  ----- Original Message ----- 
  From: cagecko at comcast.net 
  To: strider96 at earthlink.net ; Miata List 
  Sent: Tuesday, August 21, 2007 6:47 PM
  Subject: Re: [Miata] BRB & E-brake warning light


  am I the only one trying to figure out what a "BRB" is? 
  Last I heard, it stood for "Be Right Back" in Internet lingo

    -------------- Original message -------------- 
    From: "Fred Dagher" <strider96 at earthlink.net> 



    I finally got around to wiring my BRB 
    http://www.ravenwingperformance.net/Lighting_Electrical/Lighting-Electrical_pg2.html 
    to the E-brake warning light circuit so that the BRB lights when the ignition is on and the E-brake is engaged.  I cut the red E-brake wire near the brake handle switch and wired one end to each of the two wires on the BRB light module.  The BRB now lights as it should, but the E-brake warning light in the instrument cluster doesn't work any more.  If I disconnect the BRB and reconnect the E-brake wires, the E-brake warning light works fine.  Can anyone suggest an easy fix that will allow the BRB light and the E-brake warning light to work?

    Thanks,

    FD






------------------------------------------------------------------------------


  _______________________________________________
  Miata mailing list
  Miata at list.realbig.com
  http://list.realbig.com/mailman/listinfo/miata
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.realbig.com/pipermail/miata/attachments/20070821/6891368a/attachment.html