[Miata] Other jobs to get into when changing clutch?

[Larry Alster]

You greased a clutch cable???  On a Miata??

Larry
 
White Knight      1991 Crystal White   #99 CSP
Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
Honey B             1992 Sunburst Yellow
Whooosh           2004 Titanium Mazdaspeed MX-5
 
LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074
  ----- Original Message ----- 
  From: kcmurphy72 at insightbb.com 
  To: Larry Alster 
  Cc: Luke White ; miata at realbig.com 
  Sent: Wednesday, April 11, 2007 4:45 PM
  Subject: Re: [Miata] Other jobs to get into when changing clutch?


  > > Just ordered a new clutch kit for my '93 at 132K miles.  
  > While I'm into  it...

  Here's what I did.

  Clutch, pressure plate, pilot bearing, throwout bearing, etc.

  All exposed seals
  turret oil
  changed tranny fluid
  upper and lower shift boots
  removed heat shields from downpipe because they were vibrating and making my teeth itch
  greased the end of the clutch cable

  Somewhere in The Garage there is a writeup where someone listed the tools you will need. BUY THEM. DO NOT TRY TO CUT A CORNER!  You will be glad you spent the bucks, particularly for the bellhousing bolts. 

  I think that's it.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.realbig.com/pipermail/miata/attachments/20070411/4f63c586/attachment.html