[Miata] Other jobs to get into when changing clutch?

[Larry Alster]

Change the clutch hose for the slave cylinder if it's not new.  I use a SS 
hose.  It's SO much easier changing it with the tranny out!!!

Larry

White Knight      1991 Crystal White   #99 CSP
Silver Bullet        1992 Silverstone     #17 SM2  FM I+ Turbo
Honey B             1992 Sunburst Yellow
Whooosh           2004 Titanium Mazdaspeed MX-5

LowCountry Miata  http://www.lowcountrymiataclub.net
Masters Miata
RAGS 074
----- Original Message ----- 
From: "Luke White" <lswlistbox at earthlink.net>
To: <miata at realbig.com>
Sent: Wednesday, April 11, 2007 4:12 PM
Subject: [Miata] Other jobs to get into when changing clutch?


> Just ordered a new clutch kit for my '93 at 132K miles.  While I'm into 
> it,
> I'm already planning on doing the rear main seal due to a suspected oil 
> leak
> as well as the rubber nipple that sits above the bell housing.  What I'm
> conflicted about is the seals on the transmission.  No apparent leaks from
> the tail end, but I'm not sure about the condition of the front seal as a
> leak there would be masked by the rear main seal leak.  What's the normal
> lifespan of trans. seals?  Any gotcha's that I'm forgetting?
>
> Thanks,
>
> Luke
> '93B
>
>
> _______________________________________________
> Miata mailing list
> Miata at list.realbig.com
> http://list.realbig.com/mailman/listinfo/miata
>