[DeTomaso] Resistor on A/C Blower

[John Bentley (jab)]

I don't have a speed control picked out, but these resistors are cheap
and should be easy to find.  If anyone has the specs on this resistor,
I'll find a source (power rating and resistance, or part number).

JB
 

-----Original Message-----
From: detomaso-bounces at realbig.com [mailto:detomaso-bounces at realbig.com]
On Behalf Of SOBill at aol.com
Sent: Tuesday, September 05, 2006 9:20 AM
To: jim.gray at wnlic.com; detomaso at realbig.com
Subject: Re: [DeTomaso] Resistor on A/C Blower

 
In a message dated 9/5/2006 6:48:04 AM Pacific Standard Time,  
jim.gray at wnlic.com writes:

Bill,

After having repaired two of the low/high resistors on the  Pantera A/C
blower, I was wondering if anyone has come up with a more  modern
replacement.  I didn't see anything in the data  base.

Those things look like some 19th century  device!

Thanks
Jim Gray





In the modern world, this job would be done with a pulse width
modulated 
switching power supply. This would provide continuous speed control  and
very low 
heat dissipation.
 
I'll search out if such an aftermarket device is available at a
reasonable 
cost.
 
Anybody know of one?
 
 
SOBill  Taylor
sobill at aol.com
_______________________________________________

Detomaso Forum Managed by POCA

Archive Search Engine Now Available at http://www.realbig.com/detomaso/

DeTomaso mailing list
DeTomaso at realbig.com
http://ftl.realbig.com/mailman/listinfo/detomaso