[DeTomaso] Simple Windsor flywheel question

[MikeLDrew at aol.com]

Hi guys,

An engine builder has asked me what size flywheel to put on a 351W that is 
going into a Pantera.  I surmise that the flywheel size is dictated by the 
bellhousing positioning of the starter, and thus the 'stock' 164-tooth flywheel 
remains, regardless of whether it's a 351C or 351W.  He mentioned that later 351W 
motors went to a smaller 157-tooth flywheel, but I maintain that the 
controlling factor is the bellhousing/starter position.

Right?

Mike